Pumping concrete 20/410 Smooth Treatment pump has many advantages over using a conveyor.When one pumps concrete, the advantage is that there is a quicker placement of the concrete than if one were to use a conveyor. As well, the pipelines have the ability to travel through constricted spaces, beneath or above walls, and cut tight corners which allows the pumped concrete to be poured on difficult to reach areas.When deciding which method is best for your project, you have to determine what type of project you will be doing as this is a key factor in determining the type of concrete placement technique that will be used.  

Concrete will be maximized through one of these methods and the method that one chooses will depend on the type and size of the construction project. When using a concrete pump, there is more of a variety of choices on how to place the concrete. Conveyors are primarily designed to transport and place such material as fill, stone, and sand. Because of the likely quick rate of the placement of the concrete, one will decrease and possibly circumvent cold joints and pour lines. As well, low humidity and hot temperature can cause early setting of freshly mixed concrete. As well, pumping concrete permits pours on top floors before lower floors.  

This is beneficial if you have a large project such as a building foundation that requires a lot of concrete. It also decrease the amount of time needed to pour the concrete so one will save on labor costs. There are also very little impediments that can obstruct a pumping line.. Pumping concrete also ensures a steady flow of concrete so the pour remains stable and manageable. As well, when you use a pump truck to pour the concrete, there is less water added thereby significantly reducing shrinkage cracks and loss of strength. Pump trucks also help to decrease the amount of site traffic helping to decrease the volume of dirt and mud being dispersed throughout the worksite. There is also a superior mix combination and a more uniform blend of concrete at the point of placement. For instance, unlike pumping, when concrete is conveyed, it has to be placed as quickly as possible after the concrete mix has been combined and mixed together with the water.  

Both are effective ways of pouring concrete; however, there are advantages of pumping versus conveying. The method of adding the concrete, either through pumping or conveying, is an important part of the building project.Conveying involves a bit more consideration for a particular project.Pumped concrete is much easier to manage as it is poured to the specific designated spot, unlike conveyors which can drop big loads of concrete that have to be manually moved.The use of concrete is an essential part of many construction and renovation projects. This is why concrete that is conveyed has to be placed quickly and efficiently. Conveyors can place concrete but they do not keep the mix properly blended which results in more work when the concrete is placed.